This Live Bait Tank kit has been designed for ‘Walled’ boats, for use in applications where the tank will be above the waterline of the vessel. The kit includes the housing fittings aerators and drains to fully install the kit with a preexisting tank or baitwell.

This kit includes one pump that circulates water into the tank through a skin fitting (generally mounted through the hull / transom). The water is aerated through a Pump Out Aerator. Finally, the water can be drained through the bottom of the tank via gravity, or it can be pumped out using the pump unit. Additionally, this kit comes with fittings to attach an overflow hose to stop over filling.

The kit comes with a flow rite system 4 valve and corresponding dial, Using these items the user can select to either “FILL” the tank, where the valve will close the livewell drain side of the valve so the pump has access to fresh water outside the vessel. This water is then pumped into the tank.

Once the tank is full the “RECIRC” option may be used to circulate water from the tank through the pump and through the aerator. Additionally this setting may be used to drain the tank when the pump out option is enacted through the aerator.

Finally, the “EMPTY” function allows water to drain through the valve and exit the boat, while a one way return chamber in the valve stops water re entering the system. Note : This Kit does not include Hose or a live baitwell tank and comes with a 8’ control cable ( 244cm ) - Alternate size cables may be supplied.


Flow Rite Live Bait Tank Kit - System 4.