No products in the cart.
Product was successfully added to your shopping cart.
60
Product was successfully added to your compare list.
5
Product was successfully added to your wishlist.
5
Bestsellers
New
REPLACEMENT MOTOR CARTRIDGE FOR JOHNSON PUMP
With a new Cartridge you'll be able to upgrade the output of your bilge pump in minutes, cleaning debris from the impeller your new pump will be better than ever. Available in two sizes
Price From:
$46.45
New
VIGIL LED NAVIGATION LIGHTS PAIR
Manufactured from high quality, UV proof marine grade nylon and tinned copper wire.
Each LED circuit board is resin sealed, made with non corrosive materials and ensures that each light shines with clarity through the impact resistant diffused lens.
12 month warranty against manufacturing defects and materials.
5152 , 5152W
Price From:
$30.60
Outof stock
New
WATERSCREEN FUEL FILTER ASSY NANO WITH BOWL
Smaller boats and outboards up to 70hp are a significant financial investment. In these modern times extending engine life, improving efficiency and improving performance is becoming more important.
For too long this segment of marine outboards has relied on basic fuel filtration.
Finer particles and water emulsion will evade the capabilities of basic filtration, exposing the engine to accelerated wear which contributes to loss of power and loss of economy.
WaterScreen is focused on maximising engine life and fuel efficiency for you via the optimal engine protection that only WaterScreen can give you.
TOTAL HEIGHT : 180mm
TOTAL WIDTH : 80mm
SUITS 2 AND 4 STROKE ENGINES
MULTIPLE FUEL LINE CAPABILITIES
10 MICRON FILTRATION CAPACITY
UP TO 50GPH FOR SUCTION SIDE APPLICATIONS.
Components
Nano Element Fuel Filter
The Nano will separate water on the run. This is unique to the Nano assembly. Other small filters will filter particles and yet fail to separate the water out, relying on gravity assistance or sedimentation to get the water out of the system.The Nano addresses the needs of the modern small outboard motor, protecting the highly tuned tolerances from contamination and maximizing your engine life
Replacement Clear bowl
The Nano's design will deposit unwanted water emulation in to the clear inspection bowl. You can at any time visually inspect your fuel and immediately drain any water contamination from your fuel system. You no longer need to wait for sedimentation or risk running water emulation in your fuel.
The Nano system keeps the water emulation separate.
Nylon Fuel Filter Head
Screw on fitting to suit Nano Element Fuel Filter
Inert and Non-corrosive
New
BATTERY BOX WITH VOLTMETER & POWER ACCESSORIES
Powered Box with Volt Metre, 2 x 12V sockets and Powered Lugs with supplied webbing style strap
Robust black plastic boxes to suit popular sizes of batteries.
The Powered Box offers two powered terminals (8mm) Negative and (10mm) Positive - with corresponding color coded wing nuts. In addition, the Lid houses 2 x Cigarette style power ports, commonly used by many 12v applications. Back lit digital volt meter reads voltage to one decimal point. Simply push the button to engage the screen. Complete with a circut breaker to prevent voltage surges and blow outs.
Reinforced base allows the battery to be transported by the molded carry handles on each end of the box.
Additionally the Box has a hinged handle on the lid to allow easy removal and replacement.
Supplied with webbing style strap, nylon saddles, stainless steel fasteners and adjustable buckle for the box to be secured to the floor and removed easily.
Specifications
- Inside Length: 315mm
- Inside Width: 190mm
- Inside Height: 235mm
- Outside Height: 320mm
$64.60
New
1100GPH Bilge Pump Kit
Bilge Pump 1100GPH
1100GPH Bilge Pump with 1 1/8" barb outlet.
The snap-on strainer base makes for simple installation. 12 month warranty against defects in materials and workmanship.
1 1/8" Hose
This is not simply a plastic hose.
This hose will not perforate or leak on plastic ridges like plastic cuffed hose.Our hose is premium Marine Bilge Hose, 2M of high quality durable 1 1/8" hose, flexible PVC with special smooth outer for secure fitting of clamps. No need for cuffs, smooth all the way. Our hose is reinforced internally with a rigid PVC helix.
Food Grade PVC to AS2070
Hose Clamps
High quality stainless steel banded hose clamps with a stainless steel nut and worm drive
Hi-Nylon 1 1/8" Skin Fittings
Exclusively made by Marine Warehouse, these hull/skin fittings are virtually indestructible. They feature high impact, UV resistant nylon skin fitting. A low profile snag free head complete with tension lugs for tightening of the over sized nuts.
Kit Includes:
- 1x 1100GPH Bilge Pump
- 2M of 1 1/8" Hose
- 2x Hose Clamps (16mm - 32mm)
- 1x Hi-Nylon 1 1/8" Skin Fitting
- Screw Holes: 4.5mm
$52.55
1.2L Marine Epoxy Resin & Filler Repair Kit
When added to polyester or epoxy resin, Q-CELL filler thickens the resin to make it more workable and expands it to fill in large areas.
This expansion reduces the amount of resin required therefore reducing weight. (Note: Q-CELL is only filler and should be sealed with a coat of resin before use)
RESIN AND HARDNER :
contains high 'tradesmen' quality resin and hardener, formulated in Australian for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. When modified with fillers such as wood powder, Micro Balloons or Q Cells the resin can be used as a filling and fairing compound with outstanding results.
The resins can also be used with most types of fiberglass sheeting / matting, carbon fibre or kevlar, as well as used over urethane foams and other sandwich core materials.
Q CELL FILLER :
Qcells are a light weight, microscopic glass bubbles, used as a filler with Polyester & Epoxy Resins. QCells have a reasonable compression strength and are generally used to get bulk without adding too much weight. They are also ideal for fairing. QCells are easily sanded. Not for use below waterline on permanently immersed vessels.
Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.
Clean all brushes, rollers and fibreglass tools with Acetone.
Polyester Resin, MEKP, Epoxy Resin, Chopped Strand Mat, Acetone, Tools and safety equipment are available.
Directions for use:
Maximum working time once hardener has been applied : 40Minutes
Always wear dust masks & avoid breathing vapours of resins & dust residue.
1 - Estimate needed resin and mix in hardener.
2 - Add Q-CELL to resin in small amounts, folding in the cells to avoid them blowing away. repeat this until desired consistency is reached. (For best results, a medium paste is recommended (mayonnaise consistency); avoid adding too much Q-CELL to the resin mixture or it will be too thick to apply.)
3 - Stir resin until qcell is completely saturated.
4 - Apply using a filler applicator, or another smooth hard utensil to push the filler into the recess / hole.
5- After 18 Hours the compound should be able to be sanded, after 3 days the filler should be ready for finishing
$72.00
Epoxy Resin
Contains high 'tradesmen' quality resin and hardener, formulated in Australian for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fiberglass.
Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface.
Mix in the ratio of 5 parts resin base to 1 part hardener. Clean up with acetone or epoxy solvent.
Express Shipping Not Available
| MW PART | SIZE |
|---|---|
| 7512 | 250G |
| 7513 | 600G |
| 7514 | 1.2Kg |
Price From:
$19.25
Brass Skin Fitting with Ball Valve and Tail
Skin Fitting / Through Hull Fitting designed to act as a close-able water intake or pump out.
Commonly used in Waste systems, Wash-down Systems and can be fitted to live bat set ups.
Bronze through hull fitting, with brass ball valve, and 316 grade stainless hose tail
| MW PART | THREAD SIZE (in) | CUTOUT (mm) | MAX HULL THICKNESS (mm) |
|---|---|---|---|
| 3410B | 1/2" | 27 | 35 |
| 3411B | 3/4" | 27 | 35 |
| 3412B | 1" | 34 | 35 |
| 3413B | 1 1/4" | 42 | 35 |
| 3414B | 1 1/2" | 48 | 35 |
| 3415B | 2" | 60 | 35 |
Price From:
$25.00
Ratchet Straps pair - 25 mm & 50 mm
| MW PART | Strip Width (mm) | Strip Length (mm) | Lashing Capacity |
|---|---|---|---|
| 4257B | 25 | 1500 | 270Kg |
| 4258B | 25 | 1600 | 350Kg |
| 4257B | 50 | 1500 | 500Kg |
$30.85
TRAILER STRIP RIGID - 3M - BLUE
Teflon strips suitable for use as a slide point on trailer skids and blocks.
When wet, they provide a slippery surface for hulls to slide on and off the trailer.
Width : 50mm
Height : 14mm
Length : 3000mm ( 3M )
Colour: Blue
$31.15
-13%
BERLEY BUCKET - MARLIN BAIT BOARD INCLUDING MUNCHER
UV and salt water resistant this barley bucket is built for tough fishing conditions and it's 100% Australian Made.
Comes complete with an heavy duty aluminium berley muncher.
Regular Price: $136.35
Special Price $119.31
Live Bait Pickup & 550gph Bilge Pump
LIVE BAIT ADJUSTABLE PICKUP MOUNT PLATE 205mm x 32mm
Manufactured with marine grade aluminium.
Height adjustable to ensure that the tube receives enough flow and is locked into position with a thumb screw.
Height adjustable to ensure that the tube receives enough flow and is locked into position with a thumb screw.
Specifications:
Mount Plate: 205mm x 32mm
Protrusion: 63mm
Hose Size: 12mm
Mounting Screws: 6mm
Mount Plate: 205mm x 32mm
Protrusion: 63mm
Hose Size: 12mm
Mounting Screws: 6mm
+ VIGIL BILGE PUMP 550GPH
Uses an ignition protected, high capacity output motor with efficient current draw and stainless steel impeller shafts to rid the bilge of unwanted water. The snap on strainer
base makes for simple installation.
2 month warranty against defects in materials and workmanship.
Uses an ignition protected, high capacity output motor with efficient current draw and stainless steel impeller shafts to rid the bilge of unwanted water. The snap on strainer
base makes for simple installation.
2 month warranty against defects in materials and workmanship.
$49.90
INLINE FUEL FILTERS
Economical inline fuel filters designed for use with
- 4 stroke,
- direct injection 2 stroke and
- oil injected 2 stroke outboard motors.
Not suitable for use with premix 2 stroke motors.
| MW PART | HOSE DIAMETER (mm) | BOWL LENGTH (mm) |
|---|---|---|
| 5084 | 6 | 55 |
| 5085 | 8 | 55 |
| 5086 | 10 | 55 |
$11.45
View our brands
